Whole home
Everything on the panel is backed up
[PLACEHOLDER: 2–3 sentences — client to supply]
Requires [CONFIRM — sufficient battery capacity and panel/transfer equipment]
Storage · Backup · Solar — [CITY, STATE]
Battery storage and backup power for homes and small businesses.
[PLACEHOLDER: 1–2 sentences covering new solar + storage, retrofit onto an existing array, and backup-only installations — client to supply]
[CONTRACTOR LICENCE # — CONFIRM] · [STATE]
Three entry paths
Where are you starting from?
Backup scope
Whole home or critical loads
The difference customers most often misunderstand — and the one to settle before anything is installed.
Partial / critical loads
A defined subset stays on
Typically via a separate critical-loads subpanel. [PLACEHOLDER: 2–3 sentences — client to supply]
Configuration category
Select the circuits you'd want kept on.
Medical and life-safety equipment: [CONFIRM — client's position on life-safety loads]. A battery system is not a substitute for a medically required power plan.
Indicative only. Actual backup scope and duration depend on your battery capacity, your loads and your electrical panel, and are determined at the site assessment.
Load management
Controlling high-draw circuits
Load management sheds or controls high-draw circuits during an outage so that stored energy is spent on what matters most. [PLACEHOLDER: 2–3 sentences — client to supply]
- Smart-panel approach [CONFIRM — client's equipment]
- Relay / load-controller approach [CONFIRM]
- Loads typically managed: air conditioning, electric range, EV charging, well pump
Time-of-use shifting
Charging at one time, using at another
A battery can charge at one time of day and discharge at another, under your own utility tariff. Whether that matters for you depends entirely on that tariff.
[PLACEHOLDER: 2–3 sentences — client to supply]
Rate structure
[TIME-OF-USE RATE STRUCTURE — VERIFY CLIENT'S STATE AND UTILITY]
Export
[NET METERING / EXPORT RATE — VERIFY CLIENT'S STATE AND UTILITY]
How a battery is sized
Four factors
Usable capacity[kWh — CONFIRM]
Continuous output[kW — CONFIRM]
Surge / starting capacity[kW — CONFIRM]
Loads you want backed upAgreed at assessment
Backup duration is a function of capacity and actual load. It is determined at the assessment, not on a website.
Incentives and programme status
Incentives
[PLACEHOLDER — client's own current, verified incentive summary. Must be reviewed by their tax professional.]
[INCENTIVE — VERIFY CURRENT FEDERAL, STATE AND UTILITY STATUS AT BUILD TIME]
Equipment
Component lines
- Reserve-series LFP battery moduleUsable capacity [CONFIRM] · Chemistry [CONFIRM]
- Coreline hybrid inverterContinuous output [CONFIRM]
- Transferpoint automatic transfer switchRating [CONFIRM]
- Loadset critical-loads subpanelCircuits [CONFIRM]
- Gridsense monitoringFeatures [CONFIRM]
[CONFIRM — client's actual equipment lines and installer certifications]
Safety and siting
Where a battery can go
[PLACEHOLDER: 2–3 sentences — client to supply]
- Enclosure location
- [CONFIRM]
- Clearances
- [CONFIRM]
- Ventilation
- [CONFIRM]
- Fire code and permitting
- [CONFIRM — requirements vary by state and AHJ]
- Chemistry
- [CONFIRM]
- Listings and standards
- [CONFIRM — do not print a standard number that has not been evidenced]
Small business
Keeping the essentials running
POS terminals, refrigeration, servers, pumps and lighting. [PLACEHOLDER: 2–3 sentences — client to supply]
Crew
Who installs it
[PLACEHOLDER: 2–3 sentences — client to supply]
[CREW PHOTO — client to supply]
[CREW PHOTO — client to supply]
[CREW PHOTO — client to supply]
Questions
Frequently asked
Not without storage. A grid-tied solar system without a battery shuts down automatically when the grid goes down, so that it doesn't send power into lines utility crews may be working on. Your home loses power just as it would without solar — even in daylight.
Keeping power on during an outage requires battery storage and transfer equipment configured for backup.
Only the circuits the system was configured to back up. With a critical-loads setup, that is the defined set of circuits moved to the backed-up subpanel; everything else stays off until the grid returns. With a whole-home setup, the whole panel is backed up, but high-draw appliances may still be limited or managed.
Which circuits are backed up is agreed in writing before installation.
[PLACEHOLDER: 2–3 sentences — depends on the existing inverter; confirmed on site — client to supply]
[PLACEHOLDER: 2–3 sentences — client to supply]
[CONFIRM — depends on configuration and tariff] [PLACEHOLDER: 2–3 sentences — client to supply]
[CONFIRM] [PLACEHOLDER: 2–3 sentences — client to supply]
[TYPICAL DURATION — CONFIRM] [PLACEHOLDER: 2–3 sentences — client to supply]
[CONFIRM] [PLACEHOLDER: 2–3 sentences — client to supply]
Assessment request
Check my backup options
[PLACEHOLDER: 2–3 sentences — client to supply]